Mixed Tukey Exponentially Weighted Moving Average-Modified Exponentially Weighted Moving Average Control Chart for Process Monitoring

Khanittha Talordphop, Saowanit Sukparungsee, Yupaporn Areepong

Abstract


The goal of this study is to present the mixed Tukey exponentially weighted moving average-modified exponentially weighted moving average control chart (MEME-TCC) for monitoring process location with symmetric and skewed distributions in an attempt to significantly improve detection ability. With the benefits of nonparametric assumption robustness. The average and median run lengths are supporting measurements for assessing the performance of a monitoring scheme using Monte Carlo simulation. Furthermore, the average extra quadratic loss (AEQL), relative mean index (RMI), and performance comparison index (PCI) can all be used to evaluate overall performance criteria. The proposed chart is compared with existing charts such as; EWMA, MEWMA, TCC, MEME, MMEE, and MMEE-TCC. The comparison result shows that the proposed chart is the best control chart for detecting small to moderate shifts among all distributional settings. Nevertheless, the EWMA chart detects large shifts more effectively than other charts, except in the case of the gamma distribution, where MEWMA performs best. The results of adapting the proposed control chart to two sets of real data corresponded to the research findings.

 

Doi: 10.28991/ESJ-2023-07-03-014

Full Text: PDF


Keywords


Average Run Length; MEME-TCC; Mixed Control Chart; Nonparametric Control Chart.

References


I., J.O., & Shewhart, W. A. (1932). The Economic Control of Quality of Manufactured Product. In Journal of the Royal Statistical Society (Vol. 95, Issue 3). D. Van Nostrand Company Inc. doi:10.2307/2342413.

Roberts, S. W. (1959). Control Chart Tests Based on Geometric Moving Averages. Technometrics, 1(3), 239–250. doi:10.1080/00401706.1959.10489860.

Khoo, M. B. C. (2004). A moving average control chart for monitoring the fraction non-conforming. Quality and Reliability Engineering International, 20(6), 617–635. doi:10.1002/qre.576.

PAGE, E. S. (1954). Continuous Inspection Schemes. Biometrika, 41(1–2), 100–115. doi:10.1093/biomet/41.1-2.100.

Khan, N., Aslam, M., & Jun, C. H. (2017). Design of a Control Chart Using a Modified EWMA Statistic. Quality and Reliability Engineering International, 33(5), 1095–1104. doi:10.1002/qre.2102.

Abbas, N., Riaz, M., & Does, R. J. M. M. (2013). Mixed exponentially weighted moving average-cumulative sum charts for process monitoring. Quality and Reliability Engineering International, 29(3), 345–356. doi:10.1002/qre.1385.

Zaman, B., Riaz, M., Abbas, N., & Does, R. J. M. M. (2015). Mixed Cumulative Sum-Exponentially Weighted Moving Average Control Charts: An Efficient Way of Monitoring Process Location. Quality and Reliability Engineering International, 31(8), 1407–1421. doi:10.1002/qre.1678.

Khan, N., Aslam, M., & Jun, C. H. (2016). A EWMA Control Chart for Exponential Distributed Quality Based on Moving Average Statistics. Quality and Reliability Engineering International, 32(3), 1179–1190. doi:10.1002/qre.1825.

Taboran, R., Sukparungsee, S., & Areepong, Y. (2019). Mixed moving average-exponentially weighted moving average control charts for monitoring of parameter change. Proceeding of the International Multi Conference of Engineers and Computer Scientists, 13-15 March, Hong Kong.

Sukparungsee, S., Areepong, Y., & Taboran, R. (2020). Exponentially weighted moving average - Moving average charts for monitoring the process mean. PLOS ONE, 15(2), e0228208. doi:10.1371/journal.pone.0228208.

Abbas, Z., Nazir, H. Z., Akhtar, N., Riaz, M., & Abid, M. (2020). On developing an exponentially weighted moving average chart under progressive setup: An efficient approach to manufacturing processes. Quality and Reliability Engineering International, 36(7), 2569–2591. doi:10.1002/qre.2716.

Abid, M., Mei, S., Nazir, H. Z., Riaz, M., & Hussain, S. (2021). A mixed HWMA-CUSUM mean chart with an application to manufacturing process. Quality and Reliability Engineering International, 37(2), 618–631. doi:10.1002/qre.2752.

Abid, M., Mei, S., Nazir, H. Z., Riaz, M., Hussain, S., & Abbas, Z. (2021). A mixed cumulative sum homogeneously weighted moving average control chart for monitoring process mean. Quality and Reliability Engineering International, 37(5), 1758–1771. doi:10.1002/qre.2824.

Saengsura, N., Sukparungsee, S., & Areepong, Y. (2022). Mixed moving average-cumulative sum control chart for monitoring parameter change. Intelligent Automation and Soft Computing, 31(1), 635–647. doi:10.32604/iasc.2022.019997.

Talordphop, K., Sukparungsee, S., & Areepong, Y. (2022). New modified exponentially weighted moving average-moving average control chart for process monitoring. Connection Science, 34(1), 1981–1998. doi:10.1080/09540091.2022.2090513.

Alemi, F. (2016). Tukey’s control chart. Quality Management in Health Care, 13(4), 216–221. doi:10.1097/00019514-200410000-00004.

Sukparungsee, S. (2013). Asymmetric Tukey’s Control Chart Robust to Skew and Non-Skew Process Observation. World Academy of Science, Engineering and Technology, International Journal of Mathematical, Computational Science and Engineering, 7(8), 37-40.

Khaliq, Q. U. A., Riaz, M., & Ahmad, S. (2016). On designing a new Tukey-EWMA control chart for process monitoring. International Journal of Advanced Manufacturing Technology, 82(1–4), 1–23. doi:10.1007/s00170-015-7289-6.

Riaz, M., Khaliq, Q.-U.-A., & Gul, S. (2017). Mixed Tukey EWMA-CUSUM control chart and its applications. Quality Technology & Quantitative Management, 14(4), 378–411. doi:10.1080/16843703.2017.1304034.

Taboran, R., Sukparungsee, S., & Areepong, Y. (2020). A New Nonparametric Tukey MA-EWMA Control Charts for Detecting Mean Shifts. IEEE Access, 8, 207249–207259. doi:10.1109/ACCESS.2020.3037293.

Taboran, R., Sukparungsee, S., & Areepong, Y. (2021). Design of a New Tukey MA-DEWMA Control Chart to Monitor Process and its Applications. IEEE Access, 9, 102746–102757. doi:10.1109/ACCESS.2021.3098172.

Talordphop, K., Sukparungsee, S., & Areepong, Y. (2022). Performance of new nonparametric Tukey modified exponentially weighted moving average—Moving average control chart. PLOS ONE, 17(9), e0275260. doi:10.1371/journal.pone.0275260.

Alevizakos, V., Chatterjee, K., & Koukouvinos, C. (2020). The triple exponentially weighted moving average control chart. Quality Technology & Quantitative Management, 1–29. doi:10.1080/16843703.2020.1809063.

Malela-Majika, J. C., & Rapoo, E. (2017). Distribution-free mixed cumulative sum-exponentially weighted moving average control charts for detecting mean shifts. Quality and Reliability Engineering International, 33(8), 1983–2002. doi:10.1002/qre.2162.

Montgomery, D. C., Runger, G. C., & Hubele, N. F. (2009). Engineering statistics. John Wiley & Sons, Hoboken, United States.

DeCoursey, W. (2003). Statistics and probability for engineering applications. Newnes, Boston, United States.


Full Text: PDF

DOI: 10.28991/ESJ-2023-07-03-014

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Khanittha Talordphop, Saowanit Sukparungsee, Yupaporn Areepong