Investigation of Ni- and Co-Based Bifunctional Electrocatalysts for Carbon-Free Air Electrodes Designed for Zinc-Air Batteries

Reversible Ni-Based Gas Diffusion Electrode NiCo2O4 Based Bifunctional Electrocatalyst Co3O4 Based Bifunctional Electrocatalyst Alkaline Media Carbon-Free Gas Diffusion Electrode Design.

Authors

  • Emiliya Mladenova Acad. Evgeni Budevski Institute of Electrochemistry and Energy Systems, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Bl. 10, Sofia 1113,, Bulgaria
  • Miglena Slavova
    mslavova@iees.bas.bg
    1) Acad. Evgeni Budevski Institute of Electrochemistry and Energy Systems, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Bl. 10, Sofia 1113, Bulgaria. 2) "Todor Kableshkov” University of Transport, 158 Geo Milev Str., 1574 Sofia,, Bulgaria https://orcid.org/0000-0003-0536-1852
  • Borislav Abrashev Acad. Evgeni Budevski Institute of Electrochemistry and Energy Systems, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Bl. 10, Sofia 1113,, Bulgaria
  • Valentin Terziev Acad. Evgeni Budevski Institute of Electrochemistry and Energy Systems, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Bl. 10, Sofia 1113,, Bulgaria
  • Blagoy Burdin Acad. Evgeni Budevski Institute of Electrochemistry and Energy Systems, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Bl. 10, Sofia 1113,, Bulgaria
  • Gergana Raikova Acad. Evgeni Budevski Institute of Electrochemistry and Energy Systems, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Bl. 10, Sofia 1113,, Bulgaria
Vol. 7 No. 3 (2023): June
Research Articles

Downloads

Ni- and Co-oxide materials have promising electrocatalytic properties towards the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR), and attract with low cost, availability, and environmental friendliness. The stability of these materials in alkaline media has made them the most studied candidates for practical applications such as a gas diffusion electrode (GDE) for rechargeable metal-air batteries. In this work, we propose a novel concept for a carbon-free gas GDE design. A mixture of catalyst (Co3O4, NiCo2O4) and polytetrafluoroethylene was hot pressed onto a stainless-steel mesh as the current collector. To enhance the electrical conductivity and, thus, increase ORR performances, up to 70 wt.% Ni powder was included. The GDEs produced in this way were examined in a half-cell configuration with a 6 M KOH electrolyte, stainless steel counter electrode, and hydrogen reference electrode at room temperature. Electrochemical tests were performed and coupled with microstructural observations to evaluate the properties of the present oxygen electrodes in terms of their bifunctionality and stability enhancement. The electrochemical behavior of the new types of gas-diffusion electrodes, Ni/Co3O4 and Ni/NiCo2O4, shows acceptable overpotentials for OER and ORR. Better mechanical and chemical stability of electrodes consisting of Ni/NiCo2O4 (70:30 wt.%) was registered.

 

Doi: 10.28991/ESJ-2023-07-03-023

Full Text: PDF